For
most of us a high power valve amplifier is unaffordable. This
kit changes that, so that now everybody can enjoy that sublime
"valve sound". The sound of valves has never been surpassed,
nor by transistors, nor by FETs. In the course of developing
this amplifier, special attention was given to the housing so
that the expensive valves are on display in a way that is very
pleasing to the eye. The weakest point of an valve amplifier
are the output transformers ; that's the reason why we use
ultra-linear and over-rated output transformers (toroidal) to
guarantee a rich bass response. To extend the life of the
precious valves, the amplifier is provided with an switch on
delay, so that the high voltage is switched on when the valves
are warmed up.
|
Features
- pure valve sound with high quality EL34 valves
- high quality black and chrome housing
- chrome valve socket covers
- easy bias adjustment with LED indication
- removable bottom for easy access and service
- high quality capacitors and components
- gold plated input and speaker terminals
- standby function
- "Soft start" circuit for power transformer
|
Specifications
- output power: 2 x 90Wrms music power for loads of 4 or 8
ohm
- power bandwidth: 15Hz - 40kHz (-3dB ref. 50W)
- frequency range: 8Hz - 80kHz (-3dB ref. 1W)
- harmonic distortion: 0.08% (1kHz / 1W) / 0.7% (1kHz /
90W)
- signal-to-noise ratio: > 105dB (A-weighted ref. 90W)
- channel separation: > 75dB (ref. 90W)
- input impedance: 34Kohm
- input sensitivity: 1Vrms at 95W
- damping factor: > 10 (100Hz)
- weight: 17Kg
- dimensions: 425 x 130 x 350mm (16.7" x 5.1" x 13.8")
|
Downloads
- Manuals
|
