| |
VIDEO AND
RGB CONVERTER/PROCESSOR
|
To
process a PAL colour video signal it first has to be converted
back into the original Red, Green and Blue signals. In this
way the colours can be adjusted separately along with, the
colour intensity, brightness and contrast. After processing,
the signal can then be converted back into the PAL video
signal. A choice can be made between PAL Video or RGB outputs.
In addition a place has been provided on the PCB for a UHF
modulator (our type RFMOD), such that the antenna input of the
TV or video can also be used. It is also possible to connect a
SVHS input signal.
|
Specifications
- colour system: PAL (CCIR)
- controls for brightness, contrast and saturation
- separated controls for Red, Green and Blue
- composite video input (RCA-connector)
- RGB input (option)
- input level: 1Vpp
- input impedance: 75 ohm
- composite video output (RCA-connector)
- RGB-output: 9-pin SUB-D
- output level: 1Vpp
- output impedance: 75 ohm
- RF antenna in/output (in option RFMOD)
- housing included
- power supply: 16VDC / 0.5A unregulated
- PCB dimensions: 170 x 140mm (6.7" x 5.5")
- dimensions: 200 x 67 x 170mm (7.9" x 2.6" x 6.7")
- recommended adapter: PS1508
|
Downloads
- Info Sheets
| |
|
|
|
|
|
|
|
